Otevři model. Přizpůsob ho svým věcem.

6-compartment screw box with hinged lid

Gives loose screws, nuts and washers a home on the workbench, with six sections so sizes stay apart.

by Denis

Tube with inner spiral

A short tube with a thread running up the inside, so a matching part can screw straight in.

by ARNAB

Spiral rotor hub, 3 mm shaft

A three-armed hub for building your own small rotor or propeller on a thin shaft.

Support ventilateurs 120 mm inclinés pour baie

Gets cool air moving through a rack or cabinet without taking up the whole shelf.

Triple 8 mm under-desk cable clip

Gets three loose cables off the floor and tucked under the desk edge.

Five-decade rosary

A rosary for prayer on the go, or for a hand that likes something to hold.

Phone stand with charging slot

Holds your phone upright on a desk or bedside table while it charges.

Ram 1500 tire shifter knob

A little truck tire to grab every time you change gear.

Dyson dryer holder (stick-on)

Gives your Dyson hair dryer a place to live on the wall instead of the bathroom counter.

Phone stand with cable slot

Props your phone up at a comfortable angle so you can read it, watch it or video call without holding it.

Un cassetto singolo con guide laterali per il contenitore di

A roomy drawer for the things that pile up on a shelf or in a cabinet.

MagSafe landscape StandBy stand

Holds your phone on its side at the bedside so it can act as a clock while it charges.

mmWave Field Scanner Enclosure

A handheld case for a homemade scanner project, so your electronics have something to live in out in the field.

by SOLIDSTEAD

Galaxy Watch 6 charging stand

Gives your Galaxy Watch 6 a proper spot on the nightstand, tilted back so you can check the time while it charges.

XY stereo mic mount

Holds two small mics in a crossed pair for stereo recording, with the capsules sitting right on top of each other.

A transmission line speaker enclosure for Tymphany NE65W spe

A small cabinet for a Tymphany NE65W driver, so you can build a desktop speaker with a deeper sound than the size suggests.

70 mm window pipe end (copy)

Gives a 70 mm hose or duct somewhere neat to end at a window.

3-inch fan rotor

A three-blade rotor to push air from a small motor, for a homemade desk fan or a cooling project.

Insta360 X3 case

A hard little shell for your Insta360 X3, so it stops rattling around loose in a bag.

Heart jewelry box with chain lid

A little heart-shaped home for rings and earrings that would otherwise end up loose on the dresser.

Luxury heart jewelry box

A little heart-shaped home for rings, studs and the necklace you keep losing.

Chain-Heart Jewelry Box

A little home for rings, earrings and the odd keepsake, shaped like a heart and wrapped in a chain.

6-loop crab snare

A little cage for the end of a crabbing line, with loops set around the rim to snag a crab that comes for the bait.

Phone stand with cable slot

Props your phone up on the desk so you can read it, watch it or video call without holding it.

Luxury heart jewelry box

A little heart-shaped box for rings, earrings and the small things you'd hate to lose.

Heart jewelry box with chain lid

A little heart-shaped box for rings, studs and the odd bracelet.

Atari 2600 cartridge shelf

Gives your Atari 2600 games a proper home on the shelf instead of a pile in a drawer.

RC motor mount bracket

Holds a small RC motor upright on a flat rail so the shaft points out where you need it.

HO ballast spreader (soft)

Lays model railway ballast along HO track without it ending up on the sleepers or the rails.

R107 seat hinge cover trim

Tidies up the hinge on a seat so the pivot hardware isn't left showing.

HO ballast spreader

Lays a neat line of ballast along HO track without it bouncing into the turnouts.

Print-in-place chainmail

A flexible square of chainmail that comes off the print bed already linked, so there's nothing to assemble.

Rotary phone

A little red rotary phone for the shelf, the desk or the windowsill.

Mimikyu with rubber duck

A little desk companion for anyone who likes their Pokémon a bit odd.

USB-C phone dock

A little dock that holds your phone upright on the desk, tilted back so the screen is easy to see.

Twisty 3×3 Cube – full mechanism

A pocket puzzle for fidgety hands and long phone calls.

Mini suitcase with photo slot

A tiny suitcase for a keepsake you want to carry about.

Support Pixel 9 Pro inclinable

Props your Pixel 9 Pro up at a comfortable angle on the desk, case and all.

Перехідник Parkside 20V – основа

The base of a Parkside 20V battery adapter, so a power tool pack can feed your own gadgets.

sprocket and chain in both end

A little chain drive for the desk, with a toothed wheel at each end and a loop of links wrapped around both.

Thick-case phone stand, 65°

Holds your phone upright on the desk, even in a chunky case.

by ARNAB

Haunted Desk Dock

A little haunted castle that holds your phone upright on the desk, screen tilted back so you can read it while it charges.

Twin tape strip dispenser

Two rolls of tape side by side, ready for when one runs out or you need two kinds.

Rune pint tankard

A proper tankard for the shelf, the table or a game night.

Stackable Actimel dispenser (14 bottles)

Keeps small yogurt drink bottles lined up in the fridge so you can grab one without digging.

Nordic rune tankard

A proper mug for the one who likes a bit of saga with their drink.

iPhone 12 horn stand

Gives your iPhone 12 a place to sit upright on the desk, leaning back so the screen faces you.

Turbo safety cap (60.6 mm inlet)

Keeps stray bolts, rags and fingers out of an open turbo inlet while the engine is apart.

Phone stand with charger slot

Props your phone up at a comfortable angle on a desk or bedside table, with the charging lead tucked in behind.

Celsius fridge can dispenser

Keeps your fridge cans lined up and ready, so you're not digging around at the back for a cold one.

Print-in-place T-Rex leg

A T-Rex leg that comes off the print bed already bending.

Desk-clamp headphone & controller hanger

Gets your headphones and game controllers off the desk and onto the edge of it.

Rocket keychain

A little red rocket to hang your keys on, so they're easy to spot at the bottom of a bag.

Edge controller cable tidy

Gives a controller cable somewhere to live besides the tangle in your drawer.

Thick-case phone stand

Props your phone up at a comfortable tilt, even with a chunky case on.

Industrial heavy-duty wall hook

A wall hook for the bag, jacket or tool that keeps ending up on the floor.

A phone dock for my cars air vent that holds the cord so my

A car vent dock that keeps your phone and charging cord in one spot, so you're not hunting for the plug on every drive.

SKÅDIS-compatible pegboard insert for picture frames

Turns an ordinary picture frame into a tidy board for keys.

by Loftsmith Workshop

Mason jar lantern lid with swing handle for LED tea lights

Turns a mason jar into a little hanging lantern for an LED tea light.

by Loftsmith Workshop

Poké Ball card box

A home for your trading cards that looks like it belongs on the shelf next to them.

Slim Raspberry Pi 5 case – acrylic window

Gives a Raspberry Pi 5 a slim home where you can still see the board.

HP ZBook Power G9 snap-on case

A hard shell for carrying your HP ZBook Power G9 around without it getting scuffed.

2022 D-Max 52 mm gauge pod (vent clip)

Gives a 52 mm gauge a proper home on the dash without cutting or drilling anything.

Suporte deslizante de bandeja 1x1

A little slide-in tray holder that keeps small things in one flat, tidy block.

CYD tilt case

Gives your CYD touchscreen board a proper stand on the desk, so the screen faces you instead of lying flat.

Hidden Maze Gift Box

A gift box that makes people work a little before they get to the good part.

Soporte gato para el auto

Keeps your phone upright on the dash, held by a cat with its tail curled up behind.

5-compartment tray

Gives the loose bits on your desk or workbench five little homes instead of one big jumble.

V12 engine block

A desk-sized V12 block for anyone who likes looking at engines more than reading about them.

A case for an AIPI lite that looks like something from iron

A little case that gives your AIPI lite a red-and-gold suit of armour.

Planetary gear bearing

A little gear set that turns smoothly when you spin it, and it's fun to watch.

Rugged S26 Ultra case (rigid + TPU)

A tough case for a phone that lives in your pocket and gets dropped anyway.

iPhone 16 Plus fan-cooler case

A phone case with a small fan fitted into the back, for those long gaming or video sessions when your phone gets warm in your hand.

Gnarled tree pad rack

A little tree for the cotton pads and makeup sponges that usually end up loose on the counter.

Peccy desk figure

A little orange blob with a wide smile to keep an eye on your desk while you work.

Printed Escapement Demonstrator

Shows how a clock ticks, right on your desk.

Electronics enclosure

A small box to give a loose circuit board a proper home.

Protetor de proa 10 mm (TPU)

Slips over the pointed nose of a boat or hull part to take the knocks instead of the edge itself.

Bearing housing block (side pockets per section A-A)

A square block that holds a round bearing in a recessed seat on top, with a bore straight through the middle.

1/10 RC car wall hanger

Gets a 1/10 RC car off the floor and onto the wall.

Apple TV VESA mount behind the TV, sized to your box

Gets the Apple TV box off the shelf and out of sight, tucked on the back of your TV.

by Loftsmith Workshop

Mazda Bongo push-pin trim clip

Brings a loose trim panel back to life in your Mazda Bongo.

ARB roof vent latch clip

Holds a roof vent latch strap in place so it stops flapping around.

VEX V5 extension arm

Gives a VEX V5 robot a longer reach from a spinning shaft.

Enclosed and latching ring box that would fit in someone’s b

A small box for carrying a ring safely in a pocket or bag.

Gridfinity battery dispenser bin for AA, AAA, 18650, 21700

Gives your spare batteries a home on the shelf instead of rolling around a drawer.

by Loftsmith Workshop

Wrist-cuff drumstick

A drumstick you wear on your wrist, for tapping out a beat when your hands are busy or you can't hold a stick.

Printed bench vise

A little vise for the small stuff you keep wishing a third hand would hold.

Planetary gear bearing

A little gear set you can spin in your hand and watch for ages.

Galaxy charging stand

Props your Galaxy up at a comfortable angle while it charges, so you can still see the screen from across the desk.

Hisense TV feet risers

Lifts a Hisense TV a little higher, so a soundbar or a tangle of cables can sit underneath.

Spur gear

Passes spin from one shaft to the next without slipping.

Print-in-place hinged box

A little box for the things that keep ending up loose in a drawer.

60 mm fan stand bracket

Stands a 60 mm fan upright on your desk so it blows where you point it, instead of lying flat or hanging off a cable.

Phone charging stand

Props your phone up at a comfortable angle while it charges, so the screen stays in view on a desk or bedside table.

TARDIS police box

A little blue police box for the shelf, the desk or the top of a bookcase.

Print-in-place hinged box

A small box for the odds and ends that never have a home.

80 mm fan housing

Gives a bare 80 mm fan a proper stand-up case for your desk.

D-shaft replacement knob + fit gauge, 6 mm and 1/4 in

Brings back the knob that went missing from an amp, mixer or old radio.

by Loftsmith Workshop

Display case with bezel for CYD, Pi Touch Display 2, e-paper

Gives a small screen a proper home on your desk instead of dangling by its wires.

by Loftsmith Workshop

Light box 200mm x 200mm with a hole for a plug

A flat square box for building your own light panel, with a small hole in the side for the plug lead to come out.

Captain's Pack table clamp + swivel

Grips the edge of a table so you can hang something off it without drilling or gluing.

200 mm light box

A flat glowing panel for tracing, photographing small things or just lighting up a desk.

Kneeling Chambal dacoit figurine

A little kneeling figure with a big moustache, a beard and a turban-style hat, holding a short stick across his knees.

Utensil caddy trio

Gives your cooking spoons, spatulas and whisks a tidy home by the stove instead of a crowded drawer.

JJ space wall sign

Gives a kid's room a name on the wall, with two big orange J's circled by an orbit of planet, rocket, astronaut and stars.

Doll headband with bow

A little headband that gives a doll something to dress up for.

Media control station — soft slim panel, textured

A slim wall-mounted frame for a small touchscreen, so your music and controls live at eye level instead of on a cluttered desk.

30 mm hinged box

A tiny box for the small things that go missing in a pocket or bag.

FULLER toolbox badge

Gives a toolbox or workbench a proper name plate.

Cyberpunk GPU support with LED bar

Stops a heavy graphics card from sagging in your case.

Pi 3 A+ case with 6020 fan

A snug little house for a Raspberry Pi 3 A+ that keeps it cool.

Pumba figurine

A little warthog to keep on your desk or shelf, or to hand to a kid who loves the movie.

Pumba warthog woggle

A warthog face that sits on the front of a scout neckerchief and keeps it gathered.

Strat-style electric guitar body (HSS)

A body for the electric guitar you want to build yourself.

by Loftsmith Workshop

1.1 m longsword with a hidden steel core

A full-length longsword for costumes, stage shows and the shelf.

by Loftsmith Workshop

6'0" swallow-tail surfboard core

The shaped blank for a six-foot swallow-tail surfboard, ready to glass into your own board.

by Loftsmith Workshop

Fish tank lid riser collar

Gives your fish tank lid some breathing room.

Kitap Kutu – Şehir Hediye Kutusu

A hardback-style gift box for tucking a small present inside a book that looks like it belongs on the shelf.

Large cage bird bath

A shallow dish for your bird to splash around in.

Desk clamp webcam and light pole, 1/4-20, 12–50 mm desks

Lifts a webcam or small light up off your desk so it sits at eye level, without taking any desk space.

by Loftsmith Workshop

Gridfinity D + C battery bin

Stops D and C batteries rattling around the junk drawer.

36-DVD organizer (3 modules)

Gets a stack of DVD cases off the shelf and standing up where you can read the spines.

4-tube flat holder

Gives four tubes a tidy place to lie instead of rolling around a shelf or drawer.

12-tube rack, 300 mm

A low rack that keeps your small tubes standing in a neat row instead of rolling around the bench.

Treadmill handle backpack hook

Gives your backpack somewhere to hang while you walk or run, instead of the floor.

Twist-zoom lens barrel

A little lens barrel for anyone who likes zooming by hand.

90° hose barb reducer

Joins two hoses of different sizes around a corner, so the line turns without kinking.

Tilting stand for Ulefone Armor 34 Pro

Holds a chunky rugged phone upright on the desk and lets you tip it to whatever angle suits you.

Sierra 1500 tow hook cover

Gives the tow hook on a Sierra 1500 a tidy cover, so it stops catching the eye and the shins.

Carlton Blues caricature figure

A little desk mate for the Carlton supporter in your life.

Wall spool holder with self-centring cones

Gets a filament spool off the desk and onto the wall, where it can turn freely as you print.

by Loftsmith Workshop

Gridfinity junk-drawer bins with label tabs

Gives the loose stuff in your junk drawer a place to live: tape, a knife, a handful of AA batteries.

by Loftsmith Workshop

Print-in-place toolbox

A little red toolbox for the screwdrivers and bits that end up loose in a drawer.

by Loftsmith Workshop

Retro Blues footy mascot

A little footy mascot to keep an eye on your desk or shelf.

Questionable Benchy

A tiny tugboat for anyone who likes a printer test with a sense of humour.

Questionable Benchy

A tiny tugboat with an attitude problem.

Coffee Bean Bear

A small sitting bear for the shelf, the desk or a mug-side spot.

Chucky clapperboard

A film-slate for your next home movie shoot, or just for the shelf.

Spring loaded telescopic pole with an attachment at the end

A little net on a long reach, for scooping things out of water or fishing something back from a spot your arm won't go.

Rotating shadow lantern for LED tea lights, print-in-place

A little lantern that throws star-like speckles across the wall when an LED tea light sits inside.

by Loftsmith Workshop

Stackable hydroponic tower

Grow herbs and salad greens up instead of out, on a windowsill or balcony corner.

Xbox Series X can koozie with lid

Keeps a can of your drink dressed up like a little Xbox Series X tower on the desk.

Hot Wheels racetrack mirror frame

A mirror frame that turns a bedroom wall into a little racetrack, with rounded corners, dashed lane lines, red and white kerbs and a checkered finish line.

ULTA BEAUTY | BLAIR name badge

A name badge for the work shirt, so customers can read who's helping them.

Halloween tombstone – "First Layer"

A small tombstone for the shelf, mantel or windowsill that gives the 3D printing hobby its own Halloween joke.

Hydroponic tower – per-pocket drips and printed net cups

Grow lettuce and herbs without soil, right on a shelf or balcony.

B Dragons letter sign

A little team sign for a shelf, desk or bedroom wall.

EQ.9 milk frother housing

A little housing that gives your EQ.9 milk frother a tidy shell, with the roof sloping down toward the front.

KHS HOCO 2026 crown keychain

A little keepsake for homecoming week that clips to a bag zipper or key ring.

Xbox Series X can koozie + lid

Gives a can of fizz some Series X energy: a tall black sleeve with a green lid on top.

Mini arched shelf unit with railed drawers and cup pulls

A tiny arched bookcase for a dollhouse room or a shelf of small treasures.

TouchMath tactile numbers

Lets a little one count with their fingertips.

Owl on the moon, spellbook stand

A little owl in round glasses and a red scarf, sitting in a crescent moon on top of a stack of spellbooks.

Xbox Cooler Koozie with Lid

Keeps a drink can cold and gives your hand something better to hold than bare metal.

NYC Sewer manhole cover replica

A little slice of the street for your desk or shelf.

Hairdryer wall holder

Gets the hairdryer off the bathroom counter and onto the wall.

Shower-Bar Bottle Caddy

Gets the shampoo, conditioner and body wash off the tub edge and up onto the shower bar.