From the Loftsmith community

0.96" OLED case with wire exit

A small home for a bare 0.96" OLED board, so it stops dangling off its jumper wires. The cover sits flat on top of a rounded base, and one side has a gap where the wires leave. Change the board width and height to match your own module.

2 parts · 6 g · 32 × 32 × 11 mm

Square blue case with rounded corners and a flat grey cover, with a small gap on one side for wires
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments