From the Loftsmith community

Two-material joint pull test for PLA, PETG and TPU

Five flat two-colour strips for finding out which joint actually holds when two filaments meet. Each one links its halves a different way, from a plain butt joint to interlocking teeth. Hook a scale through the loop at each end and pull until one lets go.

5 parts · 37 g · 131 × 174 × 3 mm

Remix of Two-material joint pull test for PLA, PETG and TPU by Loftsmith Workshop

Five flat strips, grey on one half and orange on the other, each with a different joint and a hole at each end
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments