From the Loftsmith community

Hinged box 20 x 11 mm

A tiny box for the things that get lost at the bottom of a bag: earplugs, spare buttons, a few coins. The lid swings open on a rounded hinge at one end, so the two halves never get separated. Change the length or width to fit your own bits.

2 parts · 5 g · 40 × 20 × 11 mm

Small rounded rectangular box with an orange lid sitting on a blue base, hinged at one end
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • box · PLA · Flat on the bed, no supports

Print settings

Layer height
0.2 mm
Walls
2
Infill
15%
Supports
None

Good to know

  • The length wasn't given, so I assumed 40 mm. If you meant a hollow box or one with a lid, tell me.
  • It's a single static part with no moving pieces, so there is no Use it mode.

Comments