From the Loftsmith community

M8 threaded rod, 10 mm

A short stub of M8 thread for when a bolt is too long and a nut is not enough. It's a plain threaded cylinder, ready to screw into a matching hole or carry a nut. Change the length for your gap, or loosen the fit if your printer runs tight.

1 part · 0 g · 8 × 8 × 10 mm

Short threaded cylinder with a flat end, shown with a hexagonal nut around it
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments