From the Loftsmith community

Truck-bed hitch holder

Gives a hitch ball a proper place to sit in the truck bed instead of sliding around and clanking. A square sleeve slips over the shank, a pin through the side locks it in place, and the shank steps down to a ball at the end. Change the shank width and pin size to match your hitch.

1 part · 81 g · 100 × 73 × 66 mm

by mango

Square sleeve with a cross pin on a flat plate, holding a stepped hitch shank with a ball at the end
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments