From the Loftsmith community

Motor housing shell

A tidy shell for a small motor, with a round bore to drop it into and a flat mounting pad on one side so it bolts down instead of rattling around. Two little hose barbs stick out the back. Change the bore, the length or the screw spacing to match your motor.

1 part · 30 g · 65 × 46 × 62 mm

Dark cylindrical motor housing with two small hose barbs and a flat mounting pad with screw holes on one side
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments