From the Loftsmith community

Gridfinity bin – Jabra Evolve2 65 Flex (5×4)

A tray for your Jabra Evolve2 65 Flex, so the headset has a spot on the shelf instead of a tangle on the desk. It sits in a shallow pocket, and a curved notch in the rim gives your fingers room to lift it out. Change the headset size or the clearance to suit your fold.

1 part · 183 g · 210 × 168 × 49 mm

Shallow square tray with a round finger notch in one rim and a headset-shaped pocket inside
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • bin · PLA

    Print feet down. Magnet-hole ceilings are tiny bridges.

Print settings

Layer height
0.2 mm
Walls
2
Infill
15%
Supports
None

Good to know

  • It's 9.5 mm wider and 7.5 mm longer than 200 × 160 mm because of the 42 mm grid. Tell me if you need an exact 200 × 160 mm outer size and don't need it to fit a baseplate.
  • I haven't tested the feet on a real baseplate. Print one cell first to check the fit.

Comments