From the Loftsmith community

Keyboard wall end-caps

Gets a keyboard off the desk and onto the wall. Two end-caps wrap the short ends of the board and sit on a flat back plate, with a small lip at the front so it can't tip forward. Change the keyboard length, depth and thickness to match yours.

2 parts · 37 g · 39 × 45 × 150 mm

Wide flat backplate with two dark C-shaped end brackets holding a keyboard-sized slab between them
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments