From the Loftsmith community

IDST N24 charger holster for Multiboard

Gives your IDST N24 charger a proper parking spot on the workshop wall instead of the bench. It's an open-sided sleeve that sits on a Multiboard panel, with a hex vent pattern and a slot at the side so the charging cable can leave cleanly. Change the width and thickness to match your charger.

1 part · 86 g · 242 × 57 × 75 mm

Open-fronted rectangular holster with four round bolt holes and a hex vent grid, mounted on a flat panel
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments