From the Loftsmith community

P2S purge waste bin

Catches the purge waste that drops off your P2S so it lands in one spot instead of all over the table. It's an open tray with a tall back that slopes down to a low front, and a small tab holds it against the chute. Measure your chute and change the height and reach to match.

1 part · 123 g · 160 × 120 × 120 mm

Open orange tray with a tall sloped back and low front, sitting beside a flat chute plate
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments