From the Loftsmith community

Two-hole link bar

A little link for joining two pivots with a fixed gap between them. Each end is a thick round boss with a hole through it, and a flat bar runs between. Change the length to set the spacing, or the hole size to fit your pin.

1 part · 39 g · 50 × 150 × 28 mm

Flat bar with a thick round ring at each end, each ring with a hole through the middle
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments