From the Loftsmith community

Textured PEI bed scraper

For lifting a finished print off the bed without gouging it. The handle has little grip ridges and a hole at the end for hanging it on a hook. The blade ends in a thin edge that slips under a first layer. Change the blade width and length to suit your bed.

1 part · 19 g · 165 × 60 × 13 mm

Orange hand scraper with a ridged handle, a hang hole at one end and a wide flat blade at the other
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments