From the Loftsmith community

RC shock service bench

Holds your RC shocks upright while you fill, bleed and rebuild them, so nothing rolls off the bench. Each shock drops into its own socket on the raised back, with small wells and a channel in front for loose bits. Set the socket count and body diameter to match your shocks.

1 part · 266 g · 200 × 109 × 102 mm

Low blue bench with a raised back row of four round sockets holding upright shocks, wells and a channel in front
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments