From the Loftsmith community

Peanut California plate

A little California-style plate with a name on it, for a bedroom door, a kid's bike or a shelf above the desk. The letters and border stand up from the plate, and four slots near the corners take screws or zip ties. Change the slot size to match your hardware.

1 part · 52 g · 200 × 100 × 4 mm

Flat yellow license-plate-style sign with blue raised border, CALIifornia heading, the name PEANUT and four slots
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • plate · PLA

    Yellow base, filament 1. Print flat, back down.

  • blue-lettering · PLA

    Blue, filament 2. Prints with the plate.

  • snoopy-white · PLA

    White, filament 3. Prints with the plate.

  • snoopy-black · PLA

    Black, filament 4. Prints with the plate.

Print settings

Layer height
0.16 mm
Walls
2
Infill
15%
Supports
None
Notes
Four filaments: 1 yellow plate, 2 royal blue lettering and border, 3 white Snoopy body, 4 black Snoopy outline. A prime tower is used for the colour changes.

Good to know

  • Snoopy is a simplified redraw, so it won't match the reference exactly. Tell me if you'd like him closer or more detailed.
  • The skin-defect warning refers to the intended 0.8 mm raised edges of the border and letters.
  • I haven't tested the 3MF slice in Bambu Studio myself.

Comments