From the Loftsmith community

Full colour hype chain with B-Flo's logo

A dangling chain that ends in a round B-Flo's Wings & More medallion with the flame logo in colour. The links print already joined and move freely, and a small open ring at the other end hooks onto a bag or key ring. Change the chain length or medallion size to suit.

1 part · 15 g · 186 × 58 × 11 mm

Black link chain with a small ring at one end and a round B-Flo's flame logo medallion at the other
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • chain · PLA

    Whole chain and medallion print as one object, flat on the bed. The logo colours print in place on the top face of the medallion.

Print settings

Layer height
0.16-0.2 mm
Walls
3
Infill
15%
Supports
None
Notes
4 filaments: slot 1 black base and links, slots 2-4 the logo colours (orange/red/yellow), set in the slicer. A prime tower is added. Logo colour changes happen only in the top 0.8 mm of the medallion. After printing, flex each link to free it.

Hardware

  • Split ring (optional) · To hang a charm from the 8 mm end ring

Good to know

  • The chain is print-in-place with 0.6 mm gaps and I haven't test-printed it. If links fuse, raise the Link gap slider to 0.7-0.8 mm.
  • I couldn't read the wings' size, so the 8 mm ring is a guess. Change it with the Charm ring hole slider.
  • The logo's dark tool shapes blend into the black base, so only the flame, text and rings show in colour.
  • The thin 'Wings & More' lettering may print soft at 58 mm. Raise the Medallion diameter slider for crisper text.
  • There's no Use it animation because nothing moves in the model. Links only move once printed.

Comments