From the Loftsmith community
Logitech R400 battery cover (inside detail)
Gets a Logitech R400 presenter working again when the original battery door has gone missing. The top is gently domed to sit in your palm, and a small tab at one end catches the housing to hold it shut. Change the length and width to match your remote.
1 part · 3 g · 57 × 24 × 10 mm
Loading the 3D view
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
How to print it
Parts
- battery-cover · PLA · Open face down, dome up
About 3 g plus about 2 g of supports
Print settings
- Layer height
- 0.12-0.16 mm
- Walls
- 3
- Infill
- 20%
- Supports
- Light tree supports under the dome ceiling and the tab
Good to know
- The photos have no measurements, so the catch size, its position and the tab height are estimates. Print it and try it in the case. If it doesn't fit, adjust the Tab height and Nose catch width sliders on Adjust.
- The build report still flags a small step beside the inside catch. That step is part of the catch shape. The dome ceiling needs light supports, about 2 g.
- PLA is stiff, so the tab may feel less springy than the original. If it snaps, try PETG.
Comments