From the Loftsmith community

Two-material joint pull test for PLA, PETG and TPU

Find out which joint style actually holds when two filaments meet in one print. Five flat strips each change colour partway along with a different interlock, and every end has a loop for hooking a scale and pulling. Set your nozzle size and the loop hole to match your gear.

2 parts · 15 g · 131 × 67 × 3 mm

Remix of Two-material joint pull test for PLA, PETG and TPU by Loftsmith Workshop

Five flat strips, grey on one end and orange on the other, each with a different interlocking joint in the middle
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments