From the Loftsmith community

Sim-wheel handle mold

For making your own sim-wheel handle by casting it instead of carving it. The mold is two halves that line up and screw together at the corners, with a pour hole on top. Change the handle length and thickness to match your wheel.

2 parts · 192 g · 166 × 89 × 48 mm

Two-part rectangular mold, orange top half over a dark lower half, with a pour hole and four corner screw holes
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments