From the Loftsmith community

Table clip (C-jaw) + banner peg

Hangs a banner from the edge of a folding table, so the front stays clear of tape. The C-shaped jaw hooks over the tabletop and a little peg sticks out to hold the banner's grommet. Change the table thickness and the peg hole to match yours.

1 part · 10 g · 49 × 25 × 57 mm

Small orange C-shaped clip with a short peg on its back, shown beside a tabletop edge
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments