From the Loftsmith community

SKADIS toolbox brackets (L/R)

Gives a small toolbox a proper home on your SKADIS board instead of the workbench. Two L-shaped brackets peg into the slots and cradle the box from underneath, each with a curved side and a low lip at the front. Set the box width and depth to match yours.

2 parts · 46 g · 224 × 56 × 86 mm

Pair of orange L-shaped brackets pegged into a perforated board, holding a clear box between them
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments