From the Loftsmith community

Keychain phone stand

Props your phone up for a video call or a recipe, then goes back on your keys. A small lip at the front catches the bottom edge of the phone, and the hole at the back end is where the ring goes. Change the phone thickness and the lean to suit yours.

1 part · 11 g · 82 × 22 × 31 mm

Small flat orange wedge with a front lip and a ring hole, holding a phone leaning back
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments