From the Loftsmith community

Enclosed Pi camera tilt mount for Creality K1

Gives your Creality K1 a camera you can aim, so you can watch a print without standing over it. The camera sits in a small closed case on a pivoting arm, and the base has two screw slots to hold it down. Change the lens hole and the hole spacing to match your parts.

3 parts · 16 g · 48 × 26 × 69 mm

Orange square camera case with a lens window on a short tilting arm above a dark slotted base
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments