From the Loftsmith community

1404 모터 마운트

Gives a small brushless motor a flat, firm seat on a drone arm. The round end carries the four motor screws around a centre hole, and the tapered tab has two hex-shaped bolt holes plus a slot for sliding it to the right spot. Change the motor hole spacing and the bolt spacing to match your own parts.

1 part · 2 g · 44 × 22 × 4 mm

Flat orange teardrop plate with a round motor pad, four small holes and two hex bolt holes on the tab
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments