From the Loftsmith community
Blip bar-end pod
A little pod that plugs into the open end of a handlebar and keeps a small circuit board and a coin cell tucked out of sight. The body has thin ribs along its sides that press against the tube, and a round cap sits flush at the end. Change the bar's inside diameter and the board size to match your own parts.
2 parts · 7 g · 47 × 26 × 26 mm
Loading the 3D view
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
Comments