メイカーのデザイン 487 点 · 既製モデル 18 点 · 自由にリミックス

モデルを開いて、自分の物にぴったり合わせる。

ここにあるモデルはすべて動くCADです。合うまでスライダーを動かし、プリントチェックが更新されるのを確認して、STLか3MFをダウンロード。インストールもアカウントも不要です。

Made by Loftsmith

From the Loftsmith Workshop

Our own best work. Every part passed all its print checks and got a second look before going up.

Lamp shade riser and finial, 1/4-27 thread, 16-75 mm lift, a 3D printable designLoftsmith Workshop

Lamp shade riser and finial, 1/4-27 thread, 16-75 mm lift

Lifts a lamp shade that sits too low on its bulb, so the shade clears the light and hangs where it should.

サイズ
62 × 83 × 104 mm
Weight
11 g · 3 parts
Weighted jog wheel for EC11 / 6 mm D-shaft encoders, a 3D printable designLoftsmith Workshop

Weighted jog wheel for EC11 / 6 mm D-shaft encoders

A big, heavy-feeling knob for scrubbing through video or audio with a rotary encoder.

サイズ
70 × 70 × 17 mm
Weight
21 g
Electric toothbrush charger stand with slide-out drip tray, a 3D printable designLoftsmith Workshop

Electric toothbrush charger stand with slide-out drip tray

Gives your electric toothbrush charger a proper home, and the spare brush heads a place to drain.

サイズ
236 × 87 × 38 mm
Weight
88 g · 4 parts
SCD40/SCD41 CO2 monitor case with sealed sensor pod, a 3D printable designLoftsmith Workshop

SCD40/SCD41 CO2 monitor case with sealed sensor pod

A small case for an SCD40 or SCD41 CO2 sensor, so your air-quality gadget lives in a tidy box instead of a tangle of wires.

サイズ
87 × 25 × 50 mm
Weight
33 g · 2 parts
Raspberry Pi 500/500+ laptop screen lid, 140-205 mm screens, a 3D printable designLoftsmith Workshop

Raspberry Pi 500/500+ laptop screen lid, 140-205 mm screens

Turns a Raspberry Pi 500 or 500+ into a little laptop by giving it a screen to sit behind.

サイズ
297 × 90 × 146 mm
Weight
86 g · 11 parts
2.2 in e-paper price tag frame with stand and magnets, a 3D printable designLoftsmith Workshop

2.2 in e-paper price tag frame with stand and magnets

Gives a little 2.2 in e-paper price tag a proper place on the shelf or counter.

サイズ
86 × 54 × 61 mm
Weight
30 g · 2 parts
Christmas carousel for 18-note music box movements, a 3D printable designLoftsmith Workshop

Christmas carousel for 18-note music box movements

A little carousel that turns on the shaft of an 18-note music box movement and gives your winding key a reason to be on display.

サイズ
108 × 108 × 138 mm
Weight
128 g · 13 parts
Ornament and mineral specimen shipping box, 20-80 mm, a 3D printable designLoftsmith Workshop

Ornament and mineral specimen shipping box, 20-80 mm

Gets a glass ornament or a mineral specimen to a friend without a crack.

サイズ
91 × 91 × 103 mm
Weight
119 g · 5 parts
Thermostat wall plate to cover old outline, Nest and ecobee, a 3D printable designLoftsmith Workshop

Thermostat wall plate to cover old outline, Nest and ecobee

Hides the bare patch and paint ghost left behind when an old thermostat comes off the wall.

サイズ
140 × 6 × 118 mm
Weight
43 g
Stereo VU meter case for two GC9A01 round screens and ESP32, a 3D printable designLoftsmith Workshop

Stereo VU meter case for two GC9A01 round screens and ESP32

Turns two small round screens and an ESP32 into a desktop stereo level meter.

サイズ
136 × 85 × 75 mm
Weight
145 g · 7 parts
Portable monitor VESA 75/100 mount for 5-14 mm screens, a 3D printable designLoftsmith Workshop

Portable monitor VESA 75/100 mount for 5-14 mm screens

Gives a thin portable monitor a proper place on a VESA arm or stand.

サイズ
116 × 32 × 239 mm
Weight
88 g · 5 parts
Table leaf alignment pins and sleeves, 4.5-12 mm holes, a 3D printable designLoftsmith Workshop

Table leaf alignment pins and sleeves, 4.5-12 mm holes

Lines up a table leaf with the tabletop so the surfaces meet flush when you drop it in.

サイズ
117 × 92 × 17 mm
Weight
21 g · 9 parts
Window candle sill clamp holder for 15-45 mm thick sills, a 3D printable designLoftsmith Workshop

Window candle sill clamp holder for 15-45 mm thick sills

Gives a window candle a steady spot on the sill without any glue or screws.

サイズ
65 × 65 × 64 mm
Weight
33 g · 2 parts
Stacking Christmas bauble storage trays, 50-100 mm baubles, a 3D printable designLoftsmith Workshop

Stacking Christmas bauble storage trays, 50-100 mm baubles

Gives each Christmas bauble its own little cup, so nothing rolls into anything else in the box.

サイズ
152 × 152 × 95 mm
Weight
247 g · 3 parts
Weight-closing squirrel-resistant soda bottle bird feeder, a 3D printable designLoftsmith Workshop

Weight-closing squirrel-resistant soda bottle bird feeder

Feeds the birds and gives squirrels nothing for their trouble.

サイズ
138 × 111 × 81 mm
Weight
87 g · 4 parts
Living hinge thickness test strip, 2-7 layers, PETG/PLA/TPU, a 3D printable designLoftsmith Workshop

Living hinge thickness test strip, 2-7 layers, PETG/PLA/TPU

Print this before you commit to a living hinge, so you know how thin a web can go in your filament before it cracks.

サイズ
129 × 47 × 4 mm
Weight
16 g
8.8 in bar display desk stand, sized to your screen, a 3D printable designLoftsmith Workshop

8.8 in bar display desk stand, sized to your screen

Props a slim bar display upright on your desk so you can read it at a glance.

サイズ
242 × 103 × 44 mm
Weight
30 g · 2 parts
Planetary vernier drive and dial for 1/4 in or 6 mm shafts, a 3D printable designLoftsmith Workshop

Planetary vernier drive and dial for 1/4 in or 6 mm shafts

A fine-tuning knob for anything you want to set by tiny amounts, with a printed dial so you can read where you are.

サイズ
144 × 120 × 50 mm
Weight
68 g · 7 parts
ESP32 mini arcade cabinet for 2.4-3.5 in SPI screens, a 3D printable designLoftsmith Workshop

ESP32 mini arcade cabinet for 2.4-3.5 in SPI screens

A tiny arcade cabinet for your ESP32 and a little SPI screen, with a marquee up top and a control deck below.

サイズ
105 × 103 × 164 mm
Weight
171 g · 17 parts
Waveshare ESP32-P4 4.3 inch ebook reader case with page keys, a 3D printable designLoftsmith Workshop

Waveshare ESP32-P4 4.3 inch ebook reader case with page keys

A case that turns a Waveshare ESP32-P4 4.3 inch board into a little ebook reader you can stand on the desk.

サイズ
116 × 96 × 121 mm
Weight
90 g · 5 parts
Chess clock case with see-saw lever for TM1637 or OLED, a 3D printable designLoftsmith Workshop

Chess clock case with see-saw lever for TM1637 or OLED

A little case for building your own chess clock.

サイズ
150 × 90 × 73 mm
Weight
128 g · 5 parts
Christmas tree branch holder ring, split, 16-40 mm poles, a 3D printable designLoftsmith Workshop

Christmas tree branch holder ring, split, 16-40 mm poles

Gives an artificial tree's branches a proper place to sit on the trunk pole.

サイズ
75 × 37 × 24 mm
Weight
23 g · 2 parts
No-glue interlocking tile coaster for 60-95 mm mugs, a 3D printable designLoftsmith Workshop

No-glue interlocking tile coaster for 60-95 mm mugs

A coaster for the mug that always leaves a ring on your desk.

サイズ
104 × 104 × 9 mm
Weight
51 g · 18 parts
Kindle / Kobo wall frame for Home Assistant dashboards, a 3D printable designLoftsmith Workshop

Kindle / Kobo wall frame for Home Assistant dashboards

Turns an old e-reader into a little wall display for your Home Assistant dashboard.

サイズ
124 × 19 × 203 mm
Weight
74 g · 2 parts
ESP32 case that slides onto your USB wall charger, a 3D printable designLoftsmith Workshop

ESP32 case that slides onto your USB wall charger

Gives your ESP32 a spot to live right on a USB wall charger, so there's no loose board and no extra cable run.

サイズ
51 × 97 × 58 mm
Weight
46 g · 2 parts
Painter's pole vacuum adapter, tilt head, 30-40 mm wands, a 3D printable designLoftsmith Workshop

Painter's pole vacuum adapter, tilt head, 30-40 mm wands

Lets you hook a vacuum onto the end of a painter's pole, so dust gets sucked up where you sand instead of drifting down on you.

サイズ
88 × 75 × 215 mm
Weight
56 g · 4 parts
Camera bump pad and drawing wedge for phones and tablets, a 3D printable designLoftsmith Workshop

Camera bump pad and drawing wedge for phones and tablets

Props your phone or tablet at a drawing angle and gives the camera bump somewhere to sit, so the screen stops rocking when you press.

サイズ
67 × 164 × 31 mm
Weight
53 g · 5 parts
Impulse sealer table set to your bar height, fold-flat legs, a 3D printable designLoftsmith Workshop

Impulse sealer table set to your bar height, fold-flat legs

A little table that holds your bag steady while you seal it.

サイズ
169 × 123 × 67 mm
Weight
98 g · 4 parts
Hanukkah menorah for LED tea lights and LED candles, a 3D printable designLoftsmith Workshop

Hanukkah menorah for LED tea lights and LED candles

A Hanukkah menorah that holds eight LED tea lights or LED candles in a row, with the shamash raised on its own little pedestal in the middle.

サイズ
469 × 69 × 58 mm
Weight
154 g · 3 parts
Horizontal hole test: round, teardrop, flat-top, diamond, a 3D printable designLoftsmith Workshop

Horizontal hole test: round, teardrop, flat-top, diamond

Print this before you commit to a part with sideways holes, and see which hole shape your printer actually handles best.

サイズ
99 × 30 × 114 mm
Weight
38 g · 4 parts
Hanging departure board case for 3.12in SSD1322 OLED, a 3D printable designLoftsmith Workshop

Hanging departure board case for 3.12in SSD1322 OLED

A little desk stand for a 3.12in SSD1322 OLED, so a departure-board display hangs in the air instead of lying flat.

サイズ
173 × 84 × 122 mm
Weight
157 g · 5 parts
Flight sim gauge bezel for GC9A01, 2 1/4 or 3 1/8 in panel, a 3D printable designLoftsmith Workshop

Flight sim gauge bezel for GC9A01, 2 1/4 or 3 1/8 in panel

Gives a small round GC9A01 screen a proper instrument-panel face for your home flight sim.

サイズ
73 × 73 × 27 mm
Weight
24 g · 3 parts
Hidden radiator humidifier for 14-32 mm panel radiator gaps, a 3D printable designLoftsmith Workshop

Hidden radiator humidifier for 14-32 mm panel radiator gaps

Adds a little moisture to dry winter air without a gadget on your shelf.

サイズ
177 × 26 × 98 mm
Weight
63 g
Self-centering tap wrench for DIN 352 taps, M3 to M6, a 3D printable designLoftsmith Workshop

Self-centering tap wrench for DIN 352 taps, M3 to M6

Turns a small hand tap without wobbling it off-line.

サイズ
100 × 69 × 14 mm
Weight
22 g · 7 parts
Spinning thaumatrope Christmas ornament, star on tree, a 3D printable designLoftsmith Workshop

Spinning thaumatrope Christmas ornament, star on tree

A little Christmas trick for the tree.

サイズ
60 × 6 × 70 mm
Weight
13 g · 3 parts
Newel post basket for 65-95 mm square posts, no screws, a 3D printable designLoftsmith Workshop

Newel post basket for 65-95 mm square posts, no screws

A little catch-all for keys, glasses and pocket clutter, hung right on the stair post where you walk past.

サイズ
130 × 176 × 70 mm
Weight
112 g · 2 parts
4-hole ocarina, parametric key G4 to G5, with windway tests, a 3D printable designLoftsmith Workshop

4-hole ocarina, parametric key G4 to G5, with windway tests

A small ocarina you can print and play the same afternoon, with four finger holes and a range from G4 up to G5.

サイズ
132 × 58 × 79 mm
Weight
39 g · 4 parts
Pocket watch case for Waveshare 1.75 in round AMOLED, a 3D printable designLoftsmith Workshop

Pocket watch case for Waveshare 1.75 in round AMOLED

Turns a bare Waveshare 1.75 in round AMOLED into something you can carry like a pocket watch.

サイズ
230 × 87 × 40 mm
Weight
44 g · 4 parts
Tank float switch for Aqara, PARASOLL or reed switch, a 3D printable designLoftsmith Workshop

Tank float switch for Aqara, PARASOLL or reed switch

Tells you when a tank is getting full or running low, using a door sensor you already own.

サイズ
68 × 48 × 176 mm
Weight
41 g · 3 parts
Raspberry Pi Touch Display 2 10 in case, fits 180 mm beds, a 3D printable designLoftsmith Workshop

Raspberry Pi Touch Display 2 10 in case, fits 180 mm beds

Gives a Raspberry Pi Touch Display 2 a proper home on your desk instead of leaning on a stack of books.

サイズ
291 × 148 × 198 mm
Weight
135 g · 10 parts
Macro deck console for 7 in ESP32-P4 panel (JC1060P470C), a 3D printable designLoftsmith Workshop

Macro deck console for 7 in ESP32-P4 panel (JC1060P470C)

A little desk stand that tilts a 7 in ESP32-P4 panel toward you, so your macro buttons sit within easy reach.

サイズ
179 × 107 × 114 mm
Weight
125 g · 10 parts
Print-in-place seam gauge with step lock, 6 in or 150 mm, a 3D printable designLoftsmith Workshop

Print-in-place seam gauge with step lock, 6 in or 150 mm

A little sliding ruler for checking hems and seam allowances while you sew.

サイズ
176 × 38 × 10 mm
Weight
11 g · 3 parts
Cookie press discs: wreath, star, tree, snowflake 40-75 mm, a 3D printable designLoftsmith Workshop

Cookie press discs: wreath, star, tree, snowflake 40-75 mm

Spare discs for a cookie press, so the dough comes out as a wreath, star, tree or snowflake.

サイズ
118 × 57 × 8 mm
Weight
10 g · 4 parts
Locking Christmas ornament hooks for 3-12 mm branches, a 3D printable designLoftsmith Workshop

Locking Christmas ornament hooks for 3-12 mm branches

Hangs an ornament from a branch and stays put when someone brushes past.

サイズ
14 × 2 × 60 mm
Weight
11 g · 12 parts
Sunrise alarm clock case: LED ring dome + GC9A01 screen, a 3D printable designLoftsmith Workshop

Sunrise alarm clock case: LED ring dome + GC9A01 screen

A case for waking up to light instead of a buzzer.

サイズ
159 × 127 × 96 mm
Weight
166 g · 3 parts

見つからない?説明してください。

必要なパーツを一文で入力してください。このページのどのモデルとも同じチェックとスライダー付きで、あなたのプリンター向けに設計します。

自分で設計する