Fluted planter generator
A narrow foot swells into a gentle belly and flares to a rolled rim. Soft vertical flutes fade out before the rim, and their texture hides layer lines. Drainage holes cut through the floor, and a drip saucer is sized to the foot with clearance. The checks confirm every drain is open and the saucer clears the pot.
Building the model
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
Specs at the default size
Measured from the actual build on a Bambu Lab A1 in PLA. Every number updates live when you drag a slider above.
- Overall size
- 265 × 125 × 115 mm
- Parts
- 2
- Filament
- 123 g
- Print time
- 3 h
- Build plates
- 1
- Supports
- None needed
Engineering checks
- Drainage cut through the floor6 of 6 holes open, 3.2-3.5 mm radius
- Saucer clears the pot foot6.8 mm gap per side
Adjustable sizes
| Setting | Default | Range |
|---|---|---|
| Top diameter | 130 mm | 80–200 mm |
| Height | 115 mm | 60–200 mm |
| Flutes | 18 | 8–36 |
Parts list
| Part | Qty | Size (mm) | Filament | Time |
|---|---|---|---|---|
| Planter | 1 | 125 × 125 × 115 | 99 g | 2 h 23 min |
| Saucer | 1 | 104 × 104 × 12 | 24 g | 36 min |
How to make it
- Set the top diameter and height.
- Choose the number of flutes.
- Print pot and saucer; PETG or ASA for outdoor use.
Print tips
- ASA or PETG outdoors — PLA softens in sun.
- Print with 2–3 walls; vase mode would skip the floor and drains.
FAQ
Is it watertight?
The saucer is. For the pot, use 3 walls if you want to avoid seepage through the walls.
Comments