From the Loftsmith community

Insta360 X6 mount for flat TF plate

Gives an Insta360 X6 a proper foothold on a flat plate. A low rounded base holds two screw holes, and a set of prongs with a cross hole rises from it so the camera can pivot and tilt. Change the bolt spacing to match your plate's holes.

1 part · 11 g · 50 × 55 × 25 mm

Orange rounded base with two screw holes and a triangular set of prongs with a pivot hole
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments