From the Loftsmith community

ESP32-S3 Mini inline switch pod

Gives an ESP32-S3 Mini a small home in the middle of a cable, so it isn't left dangling off a breadboard. The cable runs straight through the case, with a little squeeze to hold it in place. Change the board size and the cable thickness to match your own.

2 parts · 10 g · 53 × 24 × 17 mm

Small flat case with a round orange button on top and a cable passing through each end
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments