From the Loftsmith community
Heart jewelry box
A small keepsake box for rings, earrings and the little things you'd hate to lose. The lid swings open on a hinge along the back and carries the words Amor Siempre on top, with a ring of tiny dots around the base. Scale it up or down, or loosen the lid fit.
2 parts · 66 g · 112 × 96 × 32 mm
Loading the 3D view
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
How to print it
Parts
- base · PLA · Flat, open side up
- lid · PLA · Top face down on the bed, lip pointing up
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 15%
- Supports
- None
Good to know
- The 0.3 mm lid clearance is untested. If the lid is loose or tight, change the Lid clearance slider on Adjust.
- The report flags a 0.3 mm gap ring on the lid roof. That is the intended clearance around the lip, not a defect.
Comments