From the Loftsmith community

SG90 servo mount bracket

Holds an SG90 servo still so it stops wobbling around on your robot or rig. The servo drops into a snug rectangular pocket, and a flat flange with a screw hole at each end bolts it down. Change the clearance and screw spacing to match your chassis.

1 part · 7 g · 54 × 26 × 18 mm

Low rectangular servo pocket on a rounded flange with a screw hole at each end
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments