From the Loftsmith community

Camera PCB holder

A little tray that holds a bare camera board flat, so the lens has a clear hole to look through. The low walls cup the board's edges, and a notch in one end lets the ribbon cable slip out. Change the board's length and width to fit yours.

1 part · 2 g · 37 × 17 × 7 mm

Shallow rectangular tray with a round lens hole and a notch in one end for a flat cable
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments