From the Loftsmith community

Tire changer insert set (4 pieces)

Protects wheel rims while you work a tyre on or off. The set has two flat pads, a curved blade guard with a block at one end, and a split ring that snaps round a tube. Change the pad length and width to suit your rim.

4 parts · 18 g · 120 × 173 × 21 mm

Four yellow parts: two rounded pads, a long curved guard with a block, and a split ring with a curved arm
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • pad-large · PETG-CF · flat
  • pad-small · PETG-CF · flat
  • clip-guard · PETG-CF · flat, ring axis up
  • blade-guard · PETG-CF · flat on its back

Print settings

Layer height
0.2 mm
Walls
3
Infill
15%
Supports
none

Good to know

  • Every size is estimated from the photo. Measure your originals and set the sliders before printing the full set.
  • Nothing was checked against your machine's mounting points, so print one pad first to test the fit.
  • No Use it animation or fitting path is modelled.

Comments