From the Loftsmith community

Jointer dust port adapter

Gives a jointer a proper way to hand its chips to a dust hose. A wide, flat-bottomed chute narrows into a round hose port, and the base plate has bolt holes at the corners. Change the chute opening and the port diameter to match your machine and hose.

2 parts · 204 g · 289 × 121 × 181 mm

Wide tapered chute on a flat bolt-hole plate, narrowing to a round hose port on top
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments