From the Loftsmith community

Skadis FLIMS clock holder

Gets a round wall clock off the shelf and up onto your Skadis board, where you can actually see it. A flat plate with pegs hangs on the board's slots, and a low lip at the front cradles the clock's bottom edge. Change the clock diameter and depth to fit yours.

1 part · 40 g · 120 × 47 × 72 mm

Flat pegboard plate with a small dark cradle at the bottom holding the lower edge of a large round clock
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments