From the Loftsmith community

Round disc 68 mm

A flat round blank for when you need a plain circle and don't want to cut one by hand. The top edge is softly rounded, so it feels smooth under a thumb. Change the width and thickness to match your project.

1 part · 8 g · 68 × 68 × 2 mm

Thin flat blue round disc with a smooth rounded top edge
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Parts

  • disc · PLA · Flat side down on the bed

    No supports needed

Print settings

Layer height
0.2 mm (or 0.1 mm, which lands exactly on 2.3 mm)
Walls
2
Infill
15%
Supports
None
Notes
At 0.2 mm layers the slicer may round the thickness to 2.2 or 2.4 mm. Use 0.1 mm layers if 2.3 mm has to be exact.

Good to know

  • If the thickness has to be spot on, measure it after printing. Layer height can shift it by about 0.1 mm, and first-layer squish can make the bottom edge slightly wider.

Comments