From the Loftsmith community

Baby's 1st Christmas 2026 ornament (red lettering)

A little keepsake for the tree in a new baby's first Christmas. It's a flat green fir with red raised lettering and a red star on top, and there's a loop at the peak to thread ribbon through. Change the year and the height to suit.

1 part · 10 g · 70 × 107 × 6 mm

by David's 3D PrintsEarly member

Flat green Christmas tree ornament with red star and raised lettering reading Baby's 1st Christmas 2026
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio

Parts

  • ornament · PLA (green) · Flat on its back, text facing up

    The gold lettering and star print as part of the same object from AMS slot 2. Turn off the second-colour toggle if you only want one colour.

Print settings

Layer height
0.16 mm (sharper lettering)
Walls
3
Infill
15%
Supports
None
Notes
Gold PLA in AMS slot 2 for the text and star. Without AMS, you can add a filament-change pause at 5.0 mm instead.

Good to know

  • The small letters are about 5 mm tall, so 0.16 mm layers will give the cleanest edges. If they come out fuzzy, slide Overall height up a little.
  • PLA can soften near hot old-style bulbs, so keep it away from them.
I printed this Remix

Comments