From the Loftsmith community

AM8 Electronics Bay

A tidy home for the control board and wiring under an AM8 printer. The cover has a honeycomb top so air can get in, and the plate sits on short standoffs with room for the wire connectors. Change the board hole spacing to match your own board.

2 parts · 262 g · 223 × 240 × 46 mm

Dark vented box with a honeycomb top, orange base plate and small clips along the sides
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments