From the Loftsmith community

Pi 3 B+ + relay HAT case

A snug two-part case for a Pi 3 B+ with a relay HAT stacked on top. The lid has a patch of honeycomb vents above the board, and the sides are cut open for the ports. Change the standoff height and the tallest part on the HAT to fit your own stack.

2 parts · 51 g · 120 × 63 × 43 mm

Dark box with an orange vented lid, cut-outs along the sides, and four screw posts rising above it
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments