From the Loftsmith community

Pi 5 + FlyCatcher case with bias-tee bay

A home for a Raspberry Pi 5 with a FlyCatcher board stacked on top and a bias tee tucked in beside it. The lid has a honeycomb of vent holes, and the port openings line up along the end. Change the bias tee size and where the antenna jack sits to match your parts.

2 parts · 63 g · 129 × 63 × 36 mm

Dark box with an orange vented lid, port openings at one end, and four antenna tubes rising above it
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments