From the Loftsmith community

Surface-mount toggle switch pod

Gives a toggle switch a proper home on a flat surface, so you don't have to cut a panel to use one. The toggle pokes out of a bushing hole on top, and the cable leaves through a notch low on one side. Change the bushing hole and cable size to match your parts.

1 part · 7 g · 48 × 33 × 24 mm

Small tapered orange housing with a toggle switch on top, a cable notch at the base and two screw holes
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments