From the Loftsmith community

M12 drill drawer-side holster

Gets an M12 drill off the bench and parks it on the side of a drawer, where your hand already is. A curved cradle holds the motor body and a slot takes the grip, with screw holes on the back plate. Change the motor diameter and grip width to match your drill.

1 part · 34 g · 90 × 57 × 72 mm

Red curved cradle on a flat back plate with a slot below, holding a drill motor and grip
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments