From the Loftsmith community

Pi pico case that is simple. Exposes the pins and numbers bu

A flat little base for a Raspberry Pi Pico that keeps every pin on show. The pin names are cut into the surface along both edges, so you can read GP numbers without a pinout chart. Change the board gap to loosen or tighten the fit.

1 part · 11 g · 58 × 64 × 6 mm

Flat dark rectangular base with a central slot and pin labels engraved along its two long edges
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Comments