适配你的瓶子和挂钩的淋浴置物架
四个瓶位、两个开口刷套和一体式背板，组成一个紧凑的浴室收纳架。六个按实测尺寸做的挂钩开孔和真实的排水切口都在几何中校验。这个原创原型不提供粘胶或承重等级。
Building the model
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
默认尺寸下的规格
在 Bambu Lab A1 上用 PETG 实际构建测得。拖动上方滑块时，每个数字都会实时更新。
- 整体尺寸
- 190 × 117 × 108 mm
- 零件数
- 2
- 耗材
- 167 g
- 打印时间
- 3 h 51 min
- 打印盘
- 1
- 支撑
- 不需要
工程校验
校验和参数名称直接来自 CAD 引擎，以英文显示。
- Keyhole install path clears both screw heads36 sampled poses; lift 10 mm then pull 25 mm forward; worst overlap 0.000 mm³
- Seated heads resist forward pull2 mm pull without lifting intersects each head by at least 43.2 mm³; lift first to release
- Keyholes remain inside the backplateside ligament 30.7 mm; top 11.7 mm; front skin 0.8 mm
- Keyhole lip bending estimate0.70 MPa versus 1.50 MPa (0.3x generic PETG Z allowance, a derating assumption); not a tested load rating
- Bottle floor bending estimate2.59 MPa versus 7.50 MPa; two panels with centre web, load spread over bottle diameter; 0.5x allowance is an assumption, wet creep unqualified
- Wall anchor pull-out demanddemand 9.6 N per screw; choose anchors rated at least 28.9 N pull-out and 44.1 N shear EACH in the actual wall; 60 N pull-out assumed, unverified
- Drainage under every stored item7 through-slots, 4 mm wide; brush and tube holders have open undersides
- Brush heads stay separate34 mm centre spacing for assumed 22 mm heads; 16 mm handle bores
- Bottle 1 envelope cleardiameter 48 mm; overlap 0.000 mm³
- Bottle 2 envelope cleardiameter 48 mm; overlap 0.000 mm³
- Wall screw 1 driver access before mountingcaddy and rack absent while driving; 36 poses clear the wall by volume, worst overlap 0.000 mm³
- Wall screw 2 driver access before mountingcaddy and rack absent while driving; 36 poses clear the wall by volume, worst overlap 0.000 mm³
- Rack seated without interferencetwo 6 mm locating pegs; 0.25 mm clearance per side; gravity seated, lifts out for cleaning
- Rack keys stop sideways slip1 mm lateral displacement meets the locating pockets; remove contents then lift the rack
- bottle 1 goes in58 poses along its path clear of every part.
- bottle 2 goes in58 poses along its path clear of every part.
- brush 1 assumed handle goes in28 poses along its path clear of every part.
- brush 2 assumed handle goes in28 poses along its path clear of every part.
- toothpaste assumed 38 by 24 mm goes in28 poses along its path clear of every part.
- driver: wall screw 1 BEFORE hanging caddy goes in18 poses along its path clear of every part.
- driver: wall screw 2 BEFORE hanging caddy goes in18 poses along its path clear of every part.
可调尺寸
| 设置 | 默认 | 范围 |
|---|---|---|
| Width | 190 mm | 170–220 mm |
| Depth | 110 mm | 110–125 mm |
| Bottle diameter | 48 mm | 40–60 mm |
| Brush handle diameter | 14 mm | 10–20 mm |
| Wall screw centres | 120 mm | 80–140 mm |
| Contents mass | 1.5 kg | 0.5–2 kg |
零件清单
| 零件 | 数量 | 尺寸（mm） | 耗材 | 时间 |
|---|---|---|---|---|
| brush rack | 1 | 184 × 30 × 10 | 13 g | 21 min |
| caddy | 1 | 190 × 117 × 108 | 155 g | 3 h 30 min |
制作方法
- 量出瓶子，以及现有挂钩的间距、宽度和上翘部分。
- 设置挂钩和瓶子参数，然后检查六个槽和八个排水口。
- 先打印一段挂钩配合试样，再谨慎地给置物篮加载测试。
打印建议
- 用 PETG，底面朝下打印。
- 使用前检查挂钩槽的桥接、粘胶状况和受力后的蠕变。
常见问题
附带粘钩吗？
不附带。这个示例适配你已有的两块三钩挂板。请量出它们的间距和承重上限；模型无法评估粘胶或墙面饰面。
Comments