渐开线直齿轮生成器
由基圆生成的真正渐开线齿形(压力角 20°),并内置打印所需的齿隙。设置模数和齿数后,日志会给出分度圆直径,以及与任意配对齿轮的中心距。

Building the model
Loading the 3D view
No adjustable sizes
Ask for the sizes you want to tweak, e.g. “make the width adjustable”.
What Loftsmith can do
See what Loftsmith designs
Straight from the Loftsmith Workshop, every print check passed. Need a part this page can't make? Describe it and Loftsmith designs it for you.
默认尺寸下的规格
在 Bambu Lab A1 上用 PLA 实际构建测得。拖动上方滑块时,每个数字都会实时更新。
- 整体尺寸
- 39 × 39 × 16 mm
- 零件数
- 1
- 耗材
- 6 g
- 打印时间
- 13 min
- 打印盘
- 1
- 支撑
- 不需要
工程校验
校验和参数名称直接来自 CAD 引擎,以英文显示。
- Undercut-free (≥ 17 teeth)24 teeth
可调尺寸
| 设置 | 默认 | 范围 |
|---|---|---|
| Module | 1.5 mm | 0.8–4 mm |
| Teeth | 24 | 8–120 |
| Face width | 8 mm | 3–30 mm |
| Bore | 5 mm | 2–30 mm |
| Hub with set screw | 开 | 开 / 关 |
| Backlash | 0.15 mm | 0–0.4 mm |
制作方法
- 选择模数(1–2 mm 打印效果好)。
- 设置齿数;保持 ≥ 17 以避免根切。
- 为 FDM 加上 0.1–0.2 mm 齿隙。
- 中心距 = 模数 ×(z1 + z2)/ 2。
打印建议
- 平放打印,4 层壁;受力场合用 PETG 或尼龙。
- 滴一滴干性 PTFE 润滑剂效果很好。
常见问题
该用哪个模数?
小型机构用 1–1.5 mm;要扭矩就用 2–3 mm。一对啮合的齿轮必须模数相同。
需要目录里没有的形状? 用文字生成 CAD,用你自己的话描述它

Comments