From the Loftsmith community

Pi 3 A+ case with 6020 fan

A snug little house for a Raspberry Pi 3 A+ that keeps it cool. A 6020 fan sits on top, breathing through a honeycomb grille. The side openings leave room for the ports. You can change the headroom above the board and the port clearance.

2 parts · 34 g · 74 × 63 × 24 mm

Small dark square case with an orange honeycomb-grille lid and a fan on top, port cut-outs along the sides
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments