From the Loftsmith community

3/4" x 2" board hanger brace

Holds a 3/4" x 2" board out from a wall, so a shelf or rail has something solid to sit on. A flat plate screws to the wall through four holes, and a small cradle with a curved support carries the board. Change the board width and height to match your lumber.

1 part · 20 g · 69 × 45 × 55 mm

Small blue wall plate with four screw holes and a short cradle arm sticking out to hold a board
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments