From the Loftsmith community

Pi 5 + NVMe case with magnetic lid

A little home for a Raspberry Pi 5 with an NVMe drive stacked on top. The lid has a row of slots to let heat out and holds on with magnets, so it pops off when you need to get at the board. Change the room above the HAT to suit your SSD.

2 parts · 42 g · 94 × 63 × 32 mm

Low black box with an orange vented lid and port openings along the sides, with a cable plugged in
Loading the 3D view
Loading the 3D view
No adjustable sizes

Ask for the sizes you want to tweak, e.g. “make the width adjustable”.

Change it in the Studio
I printed this Remix

Comments